 |
|
 |
 |
|
 Body-cleaning toilet seat
|
| Product Name£º Intelligent Sanitary Toilet Seat |
| Product Code£º KWS-B1/B2/B3 |
| 1. Replacement Warming:
A red line will appear when the seat cover remains 2-3 m. It reminds you to replace the seat cover.
2. Seat:
Somatological fit, fully comfortable, 67mm in width.
3. Power Supply:
A. Rechargeable battery
B. AC/DC adapter, the extensive application scope of AC/DC power voltage (100v-240v).
4. Charge (Tow Ways):
A. the power supply is available around the toilet:
- Open the white cover located on the back of pedestal and have it charged.
B. the power supply is not available around the toilet:
- Push the lever on the bottom of left side, then, take out the seat and have it charge where power supply is available
- Open the cover located on the back of pedestal, pull the red ribbon and take out the battery, then have the battery recharged where power supply is available.
5. Microcomputer & Indication Light:
A. Overload warming signal: LED light will stay on for 2 seconds.
B. If no loading or counter wheel fault for the film roller or is not installed in place signal: LED light is on all the time.
C. The LED will flash when battery is in low voltage.
D. Restarting interval (5 seconds) to avoid waste.
6. KWS-B1 Button
7. KWS-B3 Point Color Light Button
8. KWS-B2 Ring Color Light Button
Stainless steel button, stand destroying, watertight, exceed 200000 use times. Waterproof degree IP65. |
 |
|
| Product Name£º Body-cleaning toilet seat |
| Product Code£º KS-58A/B |
| 1. Warm water washing,
Spraying water automatic after relieving yourself, dispensing with toilet paper, freely adjusting water pressure, the product has a good physical therapy for patients who suffer hemorrhoids or anus inflammation.
Special design for women washing
Expect the nozzle regular cleaning, the special nozzle is added for women cleaning to meet the special requirement during women's menstrual and pregnant period. Sanitary and convenient.
2. Slowly of the toilet cover
The damping system is designed by physical buffer theory to quietly open and shut the cover and seat.
3. Warm air drying
The buttock is dried by warm air which temperature can be freely selected in use, make you comfortable in relaxation.
4. Constant temperature toilet seat£»Antibacterial toilet seat and nozzle
The temperature of toilet seat controlled by microcomputer can be changed freely in use. The toilet seat and nozzle are made of antibacterial material which can restrain germ breed and prevent to intersect infection.
5/6. Infrared induction remote device ( KS-58A ONLY )
New style hanging remote device. It adopts infrared induction to get the information. The configuration is more beautiful and the operation is more convenient. |
|
|
| Product Name£º Automatic using disposable paper dispenser |
| Product Code£º KWS-C1/C2/C3 |
| 1. KWS-C series:
Infrared sensor and stainless steel button double assurance activation system.
2. Infrared Sensor (touch free activate)
3. Replacement Warming:
A red line will appear when the seat cover remains 2-3 m. It reminds you to replace the seat cover.
4. Seat:
Somatological fit, fully comfortable, 67mm in width.
5. Power Supply:
A. Rechargeable battery
B. AC/DC adapter, the extensive application scope of AC/DC power voltage (100v-240v).
6. Charge (Tow Ways):
As the same as KWS-B series.
7. Microcomputer & Indication Light:
A. Overload warming signal: LED light will stay on for 2 seconds.
B. If no loading or counter wheel fault for the film roller or is not installed in place signal: LED light is on all the time.
C. The LED will flash when battery is in low voltage.
D. Restarting interval (5 seconds) to avoid waste.
8. KWS-C1 Button
9. KWS-C3 Point Color Light Button
10. KWS-C2 Ring Color Light Button
Stainless steel button, stand destroying, watertight, exceed 200000 use times. Waterproof degree IP65. |
|
|
| Product Name£º body-cleaning toilet seat |
| Product Code£º KS-3100 |
| 1.Man-machine engineering design;
2.Warm and comfortable antibacterial seat;
3.Built-in automatic body sensor;
4.Deodorizing;
5.Water filtering;
6.Warm water washing;
7.Dual nozzles for:
a) Common use (family use);
b) Bidet (feminine use);
8.Self cleaning nozzles;
9.Washing position adjustable;
10.Moving spraying (back and forth);
11.Massage;
12.Warm air drying;
13.Lid and seat buffer(slow down);
14.Energy Saving;
15.Multi-safeguards |
|
|
| Product Name£º KWR-B Sanitary Plastic film Roll |
| Product Code£º KWR-B |
| 1. Remove the roller from the left side to the right side.
2. Make sure one end of the roller matches the grooves in the gear. Then put the other end into the seat.
3. Put the fresh film rolls into the left side. Slide the film wrap underneath the counter wheel and across the seat.
4. Slide the film wrap to cover the whole seat.
5. Make a small tear in the left side of the film when you get to the blade and pull it through.
6. Find adhesive tape on the roller. Then get the film wrap stocked on adhesive tape and curt the film wrap around the roller.
7. Press the stainless steel button to let the film wrap turn one round.
8. Put the covers on the both left room and right room.
9. Installation complete. |
|
|
| Product Name£º Automatic using disposable paper dispenser |
| Product Code£º KSXY-WD-1 |
| 1. Switch£º
Cable control is good at used in public toilet. It is used about 20-30 times per day. It is able to stand by for 3 months.
2. Delay protection£º
It has 8 seconds of delay between every pushing of the button to avoid useless waste.
3. Seat£º
The width of the seat is 60mm, with comfortable design according to human body engineering.
a. Led instruction for switch on or off.
b. When the toilet seat is working, the led is always on.
c. When the battery is low, the led blinks to remind battery charging. Otherwise, the battery will be damaged by long time working in low battery situaton.
5. Switch£º
Available for 300000 times of working.
6. Power supply£º
a. Rechargeable storage battery £¨6V/4.5A£©.
b. A/C power, as wide as (100V¡ª240V, made by order)
7. Charging mode, (two modes)£º
a. Charged by adaptor directly when the seat is working. There is nothing to do with the normal working.
b. Disassemble the battery from the toilet seat. Charge the battery in somewhere else. Re-assemble the battery to the toilet seat. Then use the toilet seat. (Suggestion: If you have a lot of toilet seat, use spare battery for recharging, in order to avoid stop working . )
8. Charge£º
Suggest to charge every 3 months, so that the battery is able to work longer.
9. Safety and energy save:
It is not dangerous to people, since the toilet seat works with weak power. |
|
|
Copyright£ºKesai Co.,Ltd. All Rights Reserved
Address:RM.B.10/F,No,18,Zijing Road,Shenzhen Development Bank BLDG,Zhuhai,China
Phone:+86-756-2122162 Fax:+86-756-2122351 E-mail:kesai88@gmail.com Contact:Mrs Zhou.
|
|
